Re: Need to replace Nicad Battery on Southwestern Bell cordless GH5850
- From: "Michael A. Terrell" <mike.terrell@xxxxxxxxxxxxx>
- Date: Tue, 30 May 2006 16:33:03 GMT
jakdedert wrote:
There are 'many' standards. I redid one pack for a phone that had
shorter than normal AA's, with standard-sized ones. It was just a
matter of breaking out a plastic tab in the battery compartment. Given
that there was room inside for the standard cells, I can only assume the
company (V-Tech) used the smaller cells to save money. It worked fine.
That sounds like the AE cells I had to use for old Regency handheld
battery packs. BTW, I used an old business card to cover the ends of the
cells before I heat shrink that thin white sleeve over the cells to
prevent shorts. I also used a fine line Sharpie to write the date and
customer's name on the heatshrink first, which leaves a permanent
marking that can only be removed by cutting it away. It keeps people
with lots of the same battery packs from claiming a pack didn't last
through the warranty.
--
My sig file can beat up your sig file!
.
- Follow-Ups:
- Re: Need to replace Nicad Battery on Southwestern Bell cordless GH5850
- From: jenbooks13@xxxxxxxxx
- Re: Need to replace Nicad Battery on Southwestern Bell cordless GH5850
- References:
- Need to replace Nicad Battery on Southwestern Bell cordless GH5850
- From: jenbooks13@xxxxxxxxx
- Re: Need to replace Nicad Battery on Southwestern Bell cordless GH5850
- From: jakdedert
- Re: Need to replace Nicad Battery on Southwestern Bell cordless GH5850
- From: jenbooks13@xxxxxxxxx
- Re: Need to replace Nicad Battery on Southwestern Bell cordless GH5850
- From: jakdedert
- Need to replace Nicad Battery on Southwestern Bell cordless GH5850
- Prev by Date: Re: Date codes on chips 2000 to 2009
- Next by Date: Re: power conditioning
- Previous by thread: Re: Need to replace Nicad Battery on Southwestern Bell cordless GH5850
- Next by thread: Re: Need to replace Nicad Battery on Southwestern Bell cordless GH5850
- Index(es):
Relevant Pages
|
