Re: Chicago, IL West Suburbs Hitachi Big Screen Repair

Well, as long as the end result is the same is all that matters. Not
sure how he's going to jig the chassis for shutdown but, hopefully it
all works out. Good luck.

www.techdata-kicksass.net

.

Relevant Pages

  • Re: Chassis building [was Re: Model Rail - Gem Kit]
    ... Havent reached the level of sliding hornblocks. ... chassis as it is to ... from the coupling rods that not only are they grossly sloppy on the ... consider the purchase of a £200 jig and muddle on. ...
    (uk.rec.models.rail)
  • Re: Chassis jigs
    ... like to get a chassis jig so I can't blame not having a jig when the ... I have the Master chassis jig with the parts for it to be suitable for 7mm ... plate glass, some flat bar (folding bars are fine), a square and all your ... long lengths of drill rod of diameter equal to the axles. ...
    (uk.rec.models.rail)
  • Re: Chassis building [was Re: Model Rail - Gem Kit]
    ... Nice set of pictures on chassis assembly in this months model rail. ... chassis jig ... special axle jigs and the locos coupling rods. ... Comet jig seems to make a good job of aligning the frames and axle ...
    (uk.rec.models.rail)
  • Re: Chassis building [was Re: Model Rail - Gem Kit]
    ... Nice set of pictures on chassis assembly in this months model rail. ... chassis jig ... special axle jigs and the locos coupling rods. ... Comet jig seems to make a good job of aligning the frames and axle ...
    (uk.rec.models.rail)
  • Philips PTV916 shutdown problem
    ... I'm working on a Philips 60P8342 (P916 chassis) that shuts down about ... I tried pulling the convergence plugs in case a ... I also pulled the CRT sockets in case one ... It has high voltage until shutdown. ...
    (sci.electronics.repair)