Re: Expierence with using Pen Plotter for a Vinyl cutter?

Jeff Liebermann wrote:
The biggest headache was the paper feed. The rock hard
rollers on the plotter would either slip on the smooth vinyl or leave
tread marks when I cranked up the pressure. I finally ended up
machining a set of replacement soft rubber rollers.

If the rollers are rubber, clean with alcohol (NOT rubbing alcohol) and then wipe lightly with glycerin.
They will grip like hell, but won't stick
Regards
Lee in Toronto

Inviato da X-Privat.Org - Registrazione gratuita http://www.x-privat.org/join.php
.