Pioneer SD-P6091-K



RPTV Monitor/Receiver, 1000 line horizontal resolution,
manufactured 1996, digital convergence. After many years of faithful
service, and
almost perfect convergence, my old faithful Pioneer has developed a problem.
Right before my eyes, blue convergence changed on the left side of the
screen. I can bring it back to almost perfect, but not quite and I'm at the
end of range. I've never been inside a Pioneer, and I'm not looking forward
to getting down on the floor, my old knees will be complaining.
Cant be chips, because I still have control and the flaw only affects the
far left side of the screen, I'm thinking
capacitors, or solder joints, or connectors.
Any Pioneer aficionados out there with some past experience?
TIA
Deke

--
"A politician's neck should always have a noose around it.
It keeps him upright."
-Robert Heinlein


.



Relevant Pages

  • Re: Pioneer SD-P6091-K
    ... manufactured 1996, digital convergence. ... my old faithful Pioneer has developed a ... I've never been inside a Pioneer, ...
    (sci.electronics.repair)
  • Re: Pioneer SD-P6091-K
    ... manufactured 1996, digital convergence. ... my old faithful Pioneer has developed a ... I've never been inside a Pioneer, ...
    (sci.electronics.repair)
  • Re: Pioneer SD-P6091-K
    ... manufactured 1996, digital convergence. ... my old faithful Pioneer has developed a ... I've never been inside a Pioneer, ...
    (sci.electronics.repair)
  • Re: Pioneer digital convergence
    ... convergence output that they seem to have a life of about 5 to 7 years then ... Check ALL the joints on the convergence panel, every Pioneer I have seen has ... Somebody correct me if I am wrong, but those PA000X ICs do not store ... Watch me find a bad ground near the tuner on this Pioneer now L O ...
    (sci.electronics.repair)
  • Help to repair Convergence board on PIONEER SD-P6081 & STK4277-SL
    ... My Pioneer SDP 6081 tv recently developed a convergence problem. ... I called a repair man out, and he explained the convergence board must be ... under the main heatsink is usually the culprit of outter edge convergence ...
    (sci.electronics.repair)

Loading