Re: TV picture quality problems

You might try a mast mounted amp. The old adage "you don't pull the
signal, you push it" should hold true. Since it is unlikely the you can
run power up there, you need a coax powered unit. Many of them are. As
far as I know there are no real requirements for an ATSC amp, other
than to amplify 50-900 Mhz. If Terk doesn't have one maybe try Channel
Master.

Even if you took your present amp and determined the internal DC
requirement you could send the DC through the coax. You shouldn't even
have to build anything, between power pass and power block coax filters
you should have no problem setting it up.

JURB

.

Relevant Pages

  • Re: Strange aerial configuration - Winegard.jpg (0/1)
    ... I've attached a picture for which I apologize, ... Others take 12V to the amp directly, ... Power via coax and use a line power injector to add 12V to the coax. ...
    (uk.tech.digital-tv)
  • Re: Strange aerial configuration - Winegard.jpg (0/1)
    ... There is a power supply to it, ... I've attached a picture for which I apologize, ... Others take 12V to the amp directly, ... Power via coax and use a line power injector to add 12V to the coax. ...
    (uk.tech.digital-tv)
  • Re: Strange aerial configuration - Winegard.jpg (0/1)
    ... I've attached a picture for which I apologize, ... Others take 12V to the amp directly, ... Power via coax and use a line power injector to add 12V to the coax. ...
    (uk.tech.digital-tv)
  • Re: Design of SE amplifier output stages.
    ... Decide how much power your speaker needs. ... to go wrong with when trioded in something simple like an SE amp. ... Decide on transformer core material. ... Within this signal you'd want to have no more than 7Vrms of any signals ...
    (rec.audio.tubes)
  • Re: why it isnt so important, but still has meaning (long!).
    ... > amp, it may in some cases lead to problems, of which some are outlined ... > Let's assume an amplifier stage with BJTs in class AB such as we find ... > Good, negative loop feedback linearizes the amplifier's properties, so ... > Then we have the physical limitations of the power supply. ...
    (rec.audio.opinion)