SONY TV Channel Display Won't Go Away!

Just added Direct TV to a SONY KV27V10. via its RF connection

But, ever since then, the SONY's On Screen Channel Display will not go away

Nothing in the "consumer" menu helps.

Is there a "secret" or "service" menu I can access to fix this problem?

Or is this a service call type of problem?


.

Relevant Pages

  • Re: Failure To Recognize DV Camera
    ... The Sony DVC is a known working device. ... the Firewire port so I wouldn't have found out that it was faulty. ... While I have never had a Firewire port go bad I have had USB ports have ... connection was made but if I released the connector the connection would ...
    (microsoft.public.windowsxp.moviemaker)
  • Re: Failure To Recognize DV Camera
    ... since the Sony DVC is recognized by another WinXP ... Firewire port so I wouldn't have found out that it was faulty. ... connection was made but if I released the connector the connection would ...
    (microsoft.public.windowsxp.moviemaker)
  • Re: A Question for the Mac G4 Users
    ... comphrehensive list od specs. ... connection is mentioned :-) ... says IDE interface but doesn't specify the connector. ... search direct to Sony is hopeless, ...
    (rec.audio.pro)
  • Re: Cant get thru MediaNet authentication
    ... >>> cable working because it's so inconvenient having to swap out my SIM ... Are you using the Sony connection ... >the same results whether using the Cingular Connection Manager or the ...
    (alt.cellular.cingular)
  • Re: ilink
    ... I do not think it is a problem with the Sony Carmera, ... As you state your cam's display indicates that the cam is set to "DV-IN", ... On the link for "Troubleshoot connection problems" it states emphatically ... They cannot see the Camera / input device. ...
    (microsoft.public.windowsxp.video)