Re: Yamaha RX-V470

digdug wrote:
Hi,

I've had this receiver for a number of years and am quite happy with
it overall.

A bit of usage history.

I use my receiver for AM/FM listening, CD's as well as movies and TV.
I run everything through it.

A few months ago while watching TV and Movies (DVD,VHS) the sound
started switching on and off randomly, however the music side is still
working properly. you could actually hear the part inside switch on
and off.......If I knew what part it is I could replace it.....

Can anyone please help???

Maybe the main power relay - they had some problems with those. Otherwise
you'll probably need to get it to a shop. Yamaha's are "special".

Mark Z.


.

Relevant Pages

  • Yamaha RX-V470
    ... I use my receiver for AM/FM listening, CD's as well as movies and TV. ... started switching on and off randomly, however the music side is still ...
    (sci.electronics.repair)
  • Re: No satellite signal being received
    ... Faulty receiver isn't switching between low band and high band ... Faulty LNB isn't switching between low band and high band ...
    (uk.tech.tv.sky)
  • Re: New Sony Digital Wireless.
    ... The DWR-S01D receiver is a two channel unit, ... switching), and Two analog outputs. ... The receiver has remote control capability over the transmitter. ... When mounted in the new Sony PDW-700 XDCAM Camera, ...
    (rec.arts.movies.production.sound)
  • Re: HD, SD, HDMI and aspect ratio questions
    ... the receiver to switch automatically between 16:9 and 4:3 when SD ... via pin 8 when SCART is used - but SCART and HDMI cannot simultaneously be ... The HDMI specification does state that automatic switching is supported ... Minimized Differential Signaling -based protocol and associated ...
    (uk.tech.tv.sky)
  • Re: HD, SD, HDMI and aspect ratio questions
    ... programmes are broadcast in both 16:9 and 4:3. ... I am very interested to find out which models of HD receiver connected to ... via pin 8 when SCART is used - but SCART and HDMI cannot simultaneously ... The HDMI specification does state that automatic switching is supported ...
    (uk.tech.tv.sky)