Re: HP 5501A laser head repair
- From: Sam Goldwasser <sam@xxxxxxxxxxxxxxxxxx>
- Date: 15 Aug 2006 19:10:18 -0400
"mtsnist" <stocker@xxxxxxxx> writes:
Does anyone know where I can get an old HP (now Agilent) 5501A laser
head repaired? Tx.
What's wrong with it? If the tube comes on but is weak, only solution
is a new tube and that's most of the cost of the laser head..
I can take a look at it.
--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html
Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.
.
- Follow-Ups:
- Re: HP 5501A laser head repair
- From: mtsnist
- Re: HP 5501A laser head repair
- References:
- HP 5501A laser head repair
- From: mtsnist
- HP 5501A laser head repair
- Prev by Date: Re: Replacing line driver power transistor on Sony TV
- Next by Date: Re: Cannot turn on the VCR
- Previous by thread: HP 5501A laser head repair
- Next by thread: Re: HP 5501A laser head repair
- Index(es):
Relevant Pages
|
