Re: 120VAC 15A motor won't spin up to speed
- From: "Michael Kennedy" <Mikek400@xxxxxxxxxxxxxxxxxxx>
- Date: Tue, 29 Aug 2006 22:11:08 -0400
There is no belt, the shaft goes right into the compressor. I can turn it
quite eaisly with my hand.
- Mike
"Jamie" <jamie_ka1lpa_not_valid_after_ka1lpa_@xxxxxxxxxxx> wrote in message
news:g%5Jg.175$j56.107@xxxxxxxxxxxxxxx
Michael Kennedy wrote:
I forgot to mention that it trips the breaker in 15 seconds or less.pull the belt off and see if it comes up to speed.
"Michael Kennedy" <Mikek400@xxxxxxxxxxxxxxxxxxx> wrote in message
news:xZydnbQRJsHifGnZnZ2dnUVZ_sOdnZ2d@xxxxxxxxxxxxxx
I have a 120VAC 15A electric motor that is on an aircompressor that I
found. I plugged it in and the motor starts to spin slowly but never gets
going fast then trips the circuit breaker.
It spins eaisly by hand and the bearings seem to be okay. Does it
probably just need new capacitors? It has 2 120v 330uf caps on it.
- Mike
--
Real Programmers Do things like this.
http://webpages.charter.net/jamie_5
.
- References:
- 120VAC 15A motor won't spin up to speed
- From: Michael Kennedy
- Re: 120VAC 15A motor won't spin up to speed
- From: Michael Kennedy
- Re: 120VAC 15A motor won't spin up to speed
- From: Jamie
- 120VAC 15A motor won't spin up to speed
- Prev by Date: Re: 120VAC 15A motor won't spin up to speed
- Next by Date: Re: 120VAC 15A motor won't spin up to speed
- Previous by thread: Re: 120VAC 15A motor won't spin up to speed
- Next by thread: Re: 120VAC 15A motor won't spin up to speed
- Index(es):
Relevant Pages
|
|
