Re: ACER AL1721 Dead
Most of the LCD monitors are held together with internal plasic snaps
located around the edge where the top and bottom pieces fit together
After removing the corner screws, use a flat blade screwdriver to pry
the two halves apart. I start at the bottom and try to insert the
screwdriver
in the seam and slowly turn the handle. A wide blade screwdriver is
best.
After you break upen the inital plastic catch, you can slide the blade
along the seam to open the other snaps. Some of the snaps can be
quite difficult to open.
Hope this helps...
John
.
Relevant Pages
- Re: ACER AL1721 Dead
... I found more screws hidden behind a little plasticcover at botton of ... use a flat blade screwdriver to pry ... in the seam and slowly turn the handle. ... along the seam to open the other snaps. ...
(sci.electronics.repair) - Re: Keypad removal
... gently push to unlock the snaps, it will sorta hinge off in the opposite ... direction of the slots...if slot on bottom it will hinge off towards the ... top...some keypads also have tiny snaps on each side as well. ... | keypad to paint the wall, but can't see how it's attached. ...
(alt.security.alarms) - skipping AND breaking
... I've had a new machine since the beginning of the December, so not long, I've been very happy with piecing, some machine embroidery I've tried and the quilting of the first two quilts, which were both small and didn't have very complex quilting, one everything free motion was a gradual curve going over no seams, 2nd was quilted with a spiders web, did cross seams and appeared to be fine. ... The third was where things started to go wrong, but I assumed it was the batting, as I was trying a fusible for the first time, the skipping would happen as I crossed a seam and the thread would snap. ... I made a test sandwich and everything appeared fine, but on to the big quilt and it's a disaster, I don't think I'm moving too slow or two fast as it's find until I get to the seam, the way it then snaps is making me wonder if somehow hitting the seam makes something unhappy and the top tension suddenly tightens and then it snaps. ...
(rec.crafts.textiles.quilting) - Re: skipping AND breaking
... seam and the thread would snap. ... a test sandwich and everything appeared fine, but on to the big quilt ... tension suddenly tightens and then it snaps. ... I'm going to have to drag the quilt in with me as unless I make a small ...
(rec.crafts.textiles.quilting) - Re: To be sure
... The bottom line is that Office 2004 is NOT compatible with Spaces ... I have also had occasions where it simply snaps to a different space ... John McGhie, Consultant Technical Writer ... McGhie Information Engineering Pty Ltd ...
(microsoft.public.mac.office.word) |
|
