Re: Emerson VCR ejecting tapes, power light blinks
- From: JR North <jasonrnorth@xxxxxxxxxxx>
- Date: Thu, 28 Sep 2006 16:25:16 -0700
The load sequence is not completing, causing the unit to abort the load and shut down. Causes: slipping belts, stripped/out of time gearing, bad mode switch, etc.
Junk it. VCRs are a dime a dozen on Ebay.
JR
Mary wrote:
My VCR loads the tape, then ejects the tape and the power light
blinks.
When I power on the VCR with no tape in, I hear a click and the power
light blinks. Theres no obstruction in the VCR.
Model EV787
TIA
--
--------------------------------------------------------------
Home Page: http://www.seanet.com/~jasonrnorth
.
- Follow-Ups:
- References:
- Prev by Date: Re: Car mirror heater pad
- Next by Date: book or manual
- Previous by thread: Emerson VCR ejecting tapes, power light blinks
- Next by thread: Re: Emerson VCR ejecting tapes, power light blinks
- Index(es):
Loading
