Re: Panasonic VCR F05 Error

<grumpy@xxxxxxxxxxxxxx> wrote in message
news:dkgam2tnerl5o26rfvlhf55um5kkolva02@xxxxxxxxxx
I have a one time top of the range Panasonic NV-HD670 VCR that won't eject
a tape and just sits
there displaying an F05 error code.

Any ideas as to the cause and whether it is worth repairing?

Thanks


NV HD600 and 610 manual shows F05 to be tape not wound back into cassette

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/



.

Relevant Pages

  • Re: SP/LP VCR anomaly?
    ... audio head's position on the tape path?? ... If I cannot find whether normal or a fault I don't think I'll touch it, ... electronic hints and repair briefs, ...
    (sci.electronics.repair)
  • Re: SP/LP VCR anomaly?
    ... Linear audio LP tapes. ... audio head's position on the tape path?? ... electronic hints and repair briefs, ...
    (sci.electronics.repair)
  • Re: tape deck speed problems
    ... electronic hints and repair briefs, ... I remember the standard rate of tape travel over the heads is 2 ... inches/second or something. ... I tried that one time making a length of tape in a cassette, ...
    (sci.electronics.repair)
  • Re: VCR stops early in timer-recording
    ... causing me to think that it was maybe a tape issue. ... The start of the tape only has a small diameter to wind on to the spool, ... slips too much or a drive belt slips then it will cease to rotate, ... electronic hints and repair briefs, ...
    (sci.electronics.repair)
  • Re: tape deck speed problems
    ... That's a good idea for setting tape speed. ... I have 2 tape decks with different speed problems: ... other electronic hints and repair briefs, ...
    (sci.electronics.repair)
Quantcast