Pioneer SD-P5795W P/S problem
Unit getting progressively worse. Was intermittant now happens quite
often.
Comes on, then either a few seconds or several minutes later will shut
off. Must reset main on/off switch on the TV to make come back on.
Remote will not turn it on when this happens.
Any source for a schematic or tip on problem would help.
Thanks
--
soundman62
.
Relevant Pages
- Re: Samsung IDTV woes
... I has similar problems with an aunt's Samsung IDTV after 30 September. ... so no reset or retune possible. ... right hand arrow on the remote. ... Thanks to everyone for their replies, I told him that I would do my best to find out if there was a straightforward solution to the problem, which I'm increasingly convinced boils down to the TV requiring a more recent software version, rather than become embroiled in any more hassle I think the best thing that I can do is to point him in the direction of Simon's answer and telling him that the tidiest solution would be to invest in a new flat screen TV, especially since he can view his missing channels simply by using the Samsung as a monitor in conjunction with the Humax PVR, also to maybe hang on until next year to see the way the market is starting to pan out price-wise with a new generation of HD DVB-T2 receivers. ...
(uk.tech.digital-tv) - Re: Oregon remote thermometer problem
... >> reset makes no difference. ... > for the signal from the remote unit. ... > default settings and then searches for signals. ... Rodney Blackall ...
(uk.sci.weather) - Re: Panasonic CT25G controls wont work.
... None of the controls work on the tv or on the remote. ... >> picture and sound are excellent, but I can't change channels or control ... I called for tech support and reset the remote, ...
(sci.electronics.repair) - Re: RCA TV - Channel Labels
... I tried the Reset button. ... label. ... Oddly my 25" RCA remote doesn't have the Reset button. ...
(sci.electronics.repair) - Re: operate relay by phone...
... there are any problems - the relay would just ... 'press' the reset button on the pc ... Get an ordinary answering machine, tap into the speaker, and use a 2-tone ... Call the remote number, when the machine picks up, punch in your code ...
(sci.electronics.basics) |
|
