Generac 7500

I bought this generator a few weeks ago, used. It worked fine, but
stopped putting out any power. I contacted repair people, the local
repair facility only works on bigger units, but the man said it was
most likely the voltage regulator. Got the regulator on line and
installed it, I get power now. The 120v recepticles put out 50 v. and
the 220 put out approx. 120v. Any ideas, suggestions, referals? Thanks.

.

Relevant Pages

  • Re: Generac 7500
    ... and governor first. ... stopped putting out any power. ... I contacted repair people, the local ... most likely the voltage regulator. ...
    (sci.electronics.repair)
  • [OT] booting through RTC wake-up
    ... I use a voltage regulator to plug the system into (I live in Mexico ... But if I put a timer between the power and the voltage regulator and pop ... The BIOS description in the Abit KT7A manual says on p.3-31 that the RTC ...
    (Debian-User)
  • Re: External powering of the Marantz PMD620
    ... the reason I am writing is that I am hoping that I could power the ... voltage regulator and I am wondering whether I need to put in any ... capacitors and or use a heat sink. ... several reasons (aothouth maybe not in the NorthEast ...
    (rec.arts.movies.production.sound)
  • Re: UPSs and battery Backups mostly a RipOff !!!
    ... Rated at 110 min backup time. ... I had a Tripp Lite uninterruptible power supply that died. ... Only buy a battery backup that will give you about 5 - 10 minutes. ... cheap APC LE1200 voltage regulator thingy. ...
    (alt.comp.hardware.pc-homebuilt)
  • Re: plug-in "permanent" house wiring
    ... are larger and heavier and dissipate significant power continuously. ... Or you could have a unit with a ferroresonant voltage regulator, ... But most people use standby power supplies that switch on only when AC ...
    (alt.home.repair)