Re: Panasonic CT-36G23W Shuts Off Intermittently

kip wrote:

Dry joint someplace...
Pull out chassis and get the Mag Glass out and look for poor/bad solder joints.
Very Common.
kip

<Abbysmak@xxxxxxxxx> wrote in message news:1166906909.602508.44200@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

I have a 36" Panasonic CT-36G23W TV which keeps on shutting off
intermittently. There is no picture or sound once it shuts off. I
have no LED lights in the front of the TV to give any type of diagnose
codes. It has been happening for months now and sometimes it will come
back on by itself within 5- 25 minutes. Other times, I knock the front
right end of it and it will turn back on. This is not always an
instant fix, it works 50% of the time. It may turn back on and then
immediately off or it may not turn on at all after several hits.

Can someone provide any insight into this issue? This has been posted
in several other forums but with no resolution at all.

Thanks in advance for your help.

Ab




on that model there is what is called a DG board it is either stand up or mounted on the chassic. a plug in board with a very well known plblem of connector failure ... You can try to reseat it but is most likely need the connectors replaced a 22, 23, 24
.

Relevant Pages

  • Re: RCA 46" TV P46725SK wont turn on
    ... Does ctc number = chassis number? ... If so, the chassis number is ... kip wrote: ... The power light blinks in unison ...
    (sci.electronics.repair)
  • Re: RCA TV only has a few channels
    ... >> Chassis Number is? ... Prev by Date: ...
    (sci.electronics.repair)
  • Re: RCA F27665 repair: beyond L14401
    ... kip wrote: ... > tray which have to be lifted to release the chassis. ... I didn't damage the board. ...
    (sci.electronics.repair)
  • Re: RCA F31400SB
    ... >>>Any advice on what else to look at? ... > Start by looking at the chassis number. ... Prev by Date: ...
    (sci.electronics.repair)