Re: Treadmill Troubles
- From: Franc Zabkar <fzabkar@xxxxxxxxxxxxxxxxx>
- Date: Wed, 27 Dec 2006 07:13:38 +1100
On Tue, 26 Dec 2006 11:26:19 -0500, sven@xxxxxxxxxx put finger to
keyboard and composed:
I have a Horizon Fitness TSC5 treadmill with very low usage. Have had
2 circuit boards fail on me now. The manufacturer says the treadmill
should be on a dedicated outlet. Would failure to do this cause the
circuit boards to fail? Also - since I have 2 of these expensive dead
circuit boards - is there a way to have them repaired? The
manufacturer doesn't repair them. Any help would be greatly
appreciated.
I'm not familiar with your particular treadmill, but if it's the motor
control board, then look for MOSFET failures. If the MOSFETs are
failing repeatedly, then look for a motor problem.
If you can post photos of your boards on your web space, then someone
may be able to help you.
- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
.
- References:
- Treadmill Troubles
- From: sven
- Treadmill Troubles
- Prev by Date: Re: RCA projector tube leak
- Next by Date: Advice requested on hard to find NEC remote control
- Previous by thread: Treadmill Troubles
- Next by thread: Re: Battery Diagnosis
- Index(es):
Relevant Pages
|
