Re: WEIRD problem with CD player

An Onkyo player I once worked on had a small, barely visible crack in a
worm gear (part of the sled assly.). The gear was still gripping the
rod it was attached to OK, but on ocasions, and sometimes when used at
other angles, it would bind against its driver cog and lock the sled.
this caused some odd symptoms and intermittent operation.Maybe worth
getting a magnifying glass out anc checking the condition of any
plastic gears etc.
-B.

.

Relevant Pages

  • Re: 22 DP 42 tooth worm gear
    ... I found that the worm gear which powers the longitudinal feed is ... extremely worn and needs to be replaced. ... across the cutter for each tooth, you have to plunge the cutter into ...
    (rec.crafts.metalworking)
  • Re: 22 DP 42 tooth worm gear
    ... I found that the worm gear which powers the longitudinal feed is ... extremely worn and needs to be replaced. ... either a single point tool or a multitooth gear cutter first. ...
    (rec.crafts.metalworking)
  • Re: Back to the Penn Line Atlantic Old Tevh.
    ... the worm gear to the spur gear. ... the attachment (for the motor) screws pass through slots in the loco frame. ... This allows the motor/ worm gear assembly to be moved to accomplish adjustment of the 'worm gear mesh'. ...
    (rec.models.railroad)
  • Re: 22 DP 42 tooth worm gear
    ... Using a high spiral tap is the best way to go. ... the hob, pulls the worm gear around so no indexing head is needed. ...
    (rec.crafts.metalworking)
  • Re: Warship Turret Rotating Mechanism
    ... (Eugene Griessel) ... worm gear. ... RN training gear tended to use a horizontal motor with a worm and wheel ...
    (sci.military.naval)
Loading