Re: Schneider DVD HDD 80 won?t recognize DVD/HDD




"Sebastian Voitzsch" <sebastian.voitzsch@xxxxxx> wrote in message
news:eo5o5p$bq4$1@xxxxxxxxxxxx
Hi,

I'm working on a Schneider DVR HDD 80 that won't recognize the drives. It
boots up, I can search channels and access the menu. However, the DVD
doesn't get read, after a while it shows "def disc" on the screen. Drive
itself is ok, installed it on my computer and watched a DVD. HDD is also
fine. With a LG DVD burner installed instead of the internal drive it
sometimes starts to format the HDD, but will fail with "reset_mbr failed"
or "max_user_lba<ffffffff failed" after some seconds. Resoldering the IDE
connectors didn?t solve the issue. As far as I understood the chipset
announcements and block schematics for that platform, there are two IDE
busses, the encoder has its own bus for controlling the HDD.

The unit is the same as Tevion DVD 160 HDD II (MD80857) despite
the smaller harddisk, MPEG board is LRM302710-0201, chipset is Cirrus
CS98301-CMZ/CS92689-CBZ. Cirrus (Magnumsemi) refused to give informations,
datasheets are only given to customers.

Any hints on this?


I'd check the IDE cable, as it's an obvious and replaceable item! They
usually use insulation displacement connectors which rely on the metal
prongs severing the insulation to make contact which the conductors. They
occasionally go bad.

Also, I'd check the power supply is stable, the correct voltages are present
and there's a permissable level of ripple on the rails. Switchmode PSUs in
these sorts of units are frequently sources of trouble but easily
diagnosable with a a quick look at the outputs with a scope.

Failing that, parts are unlikely to be readily available to end users, so if
the chipset has issues it may be trash. It's possible the unit's BIOS has
become corrupted, but that's a long shot.

Morse


.



Relevant Pages

  • Re: Vista 32 Ultimate Will not boot into windows from new HDD
    ... The funny thing is, after checking, the SATA HDD is set as the priority, not ... BIOS and HDD settings are correct. ... Remember that it lets me boot with the DVD in, and it does not matter if the ... If I start with the Vista DVD in one of the two DVD drives, ...
    (microsoft.public.windows.vista.general)
  • MSs answer to RROD: Install to HDD
    ... So now you can install entire DVDs to the hard drive on the 360. ... The DVD drives are the main cause of noise in the 360 during gameplay, ... Ps3 from the HDD when installed as such, ...
    (alt.games.video.xbox)
  • Re: Schneider DVD HDD 80 won?t recognize DVD/HDD
    ... I'm working on a Schneider DVR HDD 80 that won't recognize the drives. ... However, the DVD ... With a LG DVD burner installed instead of the internal drive it ...
    (sci.electronics.repair)
  • Re: Schneider DVD HDD 80 won?t recognize DVD/HDD
    ... I'm working on a Schneider DVR HDD 80 that won't recognize the drives. ... However, the DVD ... With a LG DVD burner installed instead of the internal drive it ...
    (sci.electronics.repair)
  • IO performance problems when writing to DVD-RAM/ZIP/MO
    ... I did some searching to see if I can get the count of dirty buffers on a ... Hard disk and DVD together. ... when I run dd on both DVD and HDD together even the HDD ...
    (Linux-Kernel)