Re: Computer/printer problem, please help !!

On 20 Jan 2007 15:08:40 -0800, "moonlite" <elect21st@xxxxxxx> put
finger to keyboard and composed:

Ok, I know this is an old computer but it has been upgraded not long
ago and I use it for very basic stuff like reading discs only. It comes
on and seems to work just fine but the problem I'm having with it is: I
can't get it to work with my printer to print.

Computer: HP Pavilion (has been upgraded with intel chip)
Operating System: Windows 98
Printer: Lexmark Z600

I installed the driver several times so that's not the problem. When I
try to print, I always get a message that printer is not connected to
the correct port...or something like that. The printer's literature
says it must be connected via a USB cable. It is connected just fine
and I have two USB ports on the back of my computer. I tried them both.
When I go into my Device Manager to see to which port the printer is
set to print, I can only find ports COM1 and LPT1. I do not see the USB
port option listed there so I can't choose it and that's where my
problem is - I think. Why isn't the computer seeing my two USB ports ?
What can I do to fix this problem ? I hate to throw away this thing as
it is working just fine otherwise and I use it very little. Thank you
so much for any help.

There is a utility on your Win98 CD called "usbview.exe". IIRC,
usbview will see any USB hardware even if the drivers are not loaded.

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
.

Relevant Pages

  • Black screen on LVDS when starting X in RedHat 8.0
    ... PCI: PCI BIOS revision 2.10 entry at 0xfd81e, ... Serial driver version 5.05c with MANY_PORTS MULTIPORT SHARE_IRQ ... can't get RTC I/O Ports ... usb.c: new USB bus registered, ...
    (linux.redhat)
  • Black screen on LVDS when starting X in RedHat 8.0
    ... PCI: PCI BIOS revision 2.10 entry at 0xfd81e, ... Serial driver version 5.05c with MANY_PORTS MULTIPORT SHARE_IRQ ... can't get RTC I/O Ports ... usb.c: new USB bus registered, ...
    (linux.redhat.install)
  • Black screen on LVDS when starting X in RedHat 8.0
    ... PCI: PCI BIOS revision 2.10 entry at 0xfd81e, ... Serial driver version 5.05c with MANY_PORTS MULTIPORT SHARE_IRQ ... can't get RTC I/O Ports ... usb.c: new USB bus registered, ...
    (comp.os.linux)
  • Black screen on LVDS when starting X in RedHat 8.0
    ... PCI: PCI BIOS revision 2.10 entry at 0xfd81e, ... Serial driver version 5.05c with MANY_PORTS MULTIPORT SHARE_IRQ ... can't get RTC I/O Ports ... usb.c: new USB bus registered, ...
    (alt.linux)
  • Black screen on LVDS when starting X in RedHat 8.0
    ... PCI: PCI BIOS revision 2.10 entry at 0xfd81e, ... Serial driver version 5.05c with MANY_PORTS MULTIPORT SHARE_IRQ ... can't get RTC I/O Ports ... usb.c: new USB bus registered, ...
    (comp.os.linux.hardware)