Re: Wiring/Base diagram for Hamamatsu R647 PMT

Sam Goldwasser wrote:
Hamamatsu doesn't seem to have any info like this on its Web site.

I'm fairly sure I've figured it out but need to confirm wiring of
existing PCB.

Thanks.

--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/ Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/ +Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm | Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.
Hamamatsu have (had) a .pdf catalog which lists this pmt
Pinout is pin 1 is DY1
pin 2 is DY3
pin 3 is DY5
pin 4 is DY7
pin 5 is DY9
pin 6 is P
pin 7 is DY10
pin 8 is DY8
pin 9 is DY6
pin 10 is DY4
pin 11 is DY2
pin 12 is IC
pin 13 is K

.

Relevant Pages

  • Re: Recovery Console (desperate)
    ... Careful with those pin changers - i.e. not to get the pin connections ... Why did you need to send the laptop to Dell for repair, ... It sounds like the HD is ill, and in such cases (especially if NTFS) ... Then put the sick HD aside, ...
    (microsoft.public.windowsxp.general)
  • Pinball stars were in alignment this weekend.
    ... And I noticed some burn/discoloration on the power ... so its looking like its due for a trip to the repair shop. ... Jackbot or a Twister. ... to send this pin back to my brother. ...
    (rec.games.pinball)
  • repairing broken traces on a PCB
    ... I have broken traces on a PCB I recently etched. ... I am wondering how some of you repair them. ... I might try pin to pin this weekend. ...
    (sci.electronics.design)
  • Re: Audio Help Please! (FT)
    ... I don't know how to read schematics, but I think my husband does ... (elevator repair). ... I did go through the parts listing for the audio boards in the manuals ... We did have someone working in the pin, and he tried swapping boards, ...
    (rec.games.pinball)
  • Re: Ebay "dont let this hairy repair scare you"
    ... when you consider that simple static electricity can fry an IC, ... > advertised repair shop. ... > Heating one pin can cause thermal stress on the package. ... > thing is to replace a chip you have to rejumper. ...
    (rec.games.pinball)