Re: Aiwa F770 cassette from 1985

On 6 Mar, 16:19, "N Cook" <diver...@xxxxxxxxx> wrote:

These units are called 4 head, 4 pairs of screened stereo wires going to the
head but all seem to relate half the tape. So one question is why 2 pinch
wheels when there seems to be no proper "reverse" side play or loop control
function as a fixed head.

The "reverse" pinchwheel seems to operate only just clear of the reverse
capstan spindle and has a strange guide that protrudes around the pinchwheel
and into the recess of the cassette - what is the function of that
protrusion and a non pinching pinch wheel ?

What do the 4 stereo heads do ?

why would someone need to replay at record - some semi-pro facility for EQ
checks ?

Sounds like a quality cassette deck.

2 pinchwheels are used to pull the tape taut as it passes over the
heads. The reuslt is a dramatic increase in reliability of tape to
head contact, thus eliminating a common cause of poor quality sound.

4 heads are used so that one can listen to the played back signal
during recording. This enables several things:
1. you can adjust the bias and hear the result almost instantly,
which makes a quality improvement with many tapes
2. If there is muck on the head, a bad tape, incomplete erase, or any
other recording problem, you know immediately, and dont waste a lot of
time making a dud recording.

Sounds like its well worth fixing.

As for the pinchwheel protrusion, I dont know what it looks like so
its impossible to say. Peraps its a small protrusion designed to hold
the cassette in exactly the right position, cheaper decks often dont
have accurate cassette shell holding, with predictable inconsistent
results on tape to head contact and alignment.

PS all this technology goes back to the 70s, there was a late 70s
Pioneer that had all the above, and is/was still one of the best
cassetts decks 20 years later.


NT

.

Relevant Pages

  • Re: Recording tape to cd
    ... >> sound level has to be consistently adjusted from the tape player. ... > Depending on the quality of the original cassette and the cassette player ... I've often found the head azimuth on some older ...
    (uk.music.guitar)
  • Tape stuck in HU
    ... Thaught I'd clean a demag the heads on my Kenwood head unit. ... It's a Kenwood KRC 678R with a built in cassette and CD magazine controller. ... the head, the SRC button cycles through TUNER, DISC, TAPE, and ALL OFF. ...
    (uk.rec.audio.car)
  • Re: Restoration of Reel-to-Reel Tapes
    ... moves across the head gap. ... FWIW squeeky cassette tapes (usually crap Supertape stuff left in the car ... cassette shell that the tape spools ride against. ... I found the SHAPE high precision shells ...
    (rec.audio.pro)
  • Re: Restoration of Reel-to-Reel Tapes
    ... moves across the head gap. ... FWIW squeeky cassette tapes (usually crap Supertape stuff left in the car ... cassette shell that the tape spools ride against. ... pressure pads as well, or idlers that squeal. ...
    (rec.audio.pro)
  • Re: Any Compact Cassette experts left?
    ... Ben Stratford wrote in message ... ... session with various tapes, I tape the first side - all ok. ... A stereo cassette head will have either two tracks or four tracks. ... the erase head is partially erasing the wrong part of the tape as well ...
    (rec.audio.tech)