power the LCD board with a computer ATX power???

I have a lcd monitor with bad internal power supply. The power supply
is responsible for 12V to the video board. And then the video board
gives 12V to the inveter.

The voltage on the power board is not very stable, it jumps around
11.56- 12.45V and causes the LCD to shut down and restart every 0.5
second.

Question: Can i use a computer PC ATX power supply 12V to power the
video board and turn on the LCD and verify the condition of video
board ?

Thanks!

.

Relevant Pages

  • Do power supplies in shut down come on briefly?
    ... or the video board on an LCD TV. ... found the 5 volts stand by voltage was working fine, ... briefly come up if something on the video board is causing my power ... output rail from the power supply to see if they start to try to come ...
    (sci.electronics.repair)
  • 16x9 aspect ratio display
    ... I'd like to know what brand/model of ... LCD and video board you're using and if you like it. ... Any glitches during ...
    (Fedora)
  • repair a viewsonic lcd monitor that keep on/off
    ... I just received a 17 inches viewsonic lcd from my friend ... If the internal power have no load(not connected to video board), ... All of the diodes have passed the diode test on the multimeter. ...
    (sci.electronics.repair)
  • Re: power the LCD board with a computer ATX power???
    ... is responsible for 12V to the video board. ... 11.56- 12.45V and causes the LCD to shut down and restart every 0.5 ... Can i use a computer PC ATX power supply 12V to power the ... but that voltage range you're seeing shouldn't be a problem. ...
    (sci.electronics.repair)