Re: Need to reset lamp life warning on ASK Impression 880 projector

carneyke wrote:
IIRC : There is a switch on the motherboard. Turn unit off (unplug),
open cover and set switch (only one on mother board) to opposite
position that it is in. Put cover back on, plug in and go. Thats
all................


Thanks. I remember seeing that switch and wondering what it was for. ;)
I previously had the unit apart to retrofit a new lamp and ballast,
after the original ballast blew up in spectacular fashion.

Maybe if I'm lucky I can reach in through the lens hole with a diddle
stick and flip the switch, so I don't need to take the whole thing apart
again. ;)
.

Relevant Pages

  • Re: Uh oh.. No beep
    ... called) 'cause one plug in the master bedroom wasn't working and he ... Also make sure if you're surge protector has a reset switch that it ... Also unplug and plug it back in a few times. ... "Usenet Filters - Learn to shut yourself the fuck up!" ...
    (alt.2600)
  • Re: Hugely OT, but I have to tell someone
    ... convert the brick barn to a woodworking workshop. ... We've considered just using plug extensions to just put at my end of the bed either a plug with a switch, or just use the pull plug and return plug method. ... There may be some specialised remote reboot device that will do the time delay bit. ...
    (uk.rec.motorcycles)
  • Re: Hugely OT, but I have to tell someone
    ... convert the brick barn to a woodworking workshop. ... We've considered just using plug extensions to just put at my end of the bed either a plug with a switch, or just use the pull plug and return plug method. ... Does that sound fair? ...
    (uk.rec.motorcycles)
  • Re: Hugely OT, but I have to tell someone
    ... convert the brick barn to a woodworking workshop. ... We've considered just using plug extensions to just put at my end of the bed either a plug with a switch, or just use the pull plug and return plug method. ... Does that sound fair? ...
    (uk.rec.motorcycles)
  • 230V PC from Europe work in the States when I move back?
    ... doesn't have a switch in the back to switch to 120; ... | on the PC to change to 120, I can simply buy a power cord with an American ... | plug, and it will be OK when I plug it back in? ... If there is no 120/230 VAC switch you should look for a label (the label ...
    (microsoft.public.windowsxp.hardware)
Loading