Re: Sony laser questions
- From: "Arfa Daily" <arfa.daily@xxxxxxxxxxxx>
- Date: Wed, 21 Mar 2007 14:54:49 GMT
<blackevilweredragon@xxxxxxxxx> wrote in message
news:1174488082.039524.68600@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Ok, thanks for the information..
Since I did mess with the POTs, and they are probably 1-3 degrees off
a little, will this cause major problems in the long run? Right now
it seems to work at the moment, as long as the CD is spotless...
As long as it is working at the moment, it is unlikely that you have done
any long term damage. Although the settings of the pots are quite critical
( two of them are in the tracking and focus servos, and one is the laser
power pot as I recall ) a few degrees from their original set positions,
should not be anything to worry about
Arfa
.
- Follow-Ups:
- Re: Sony laser questions
- From: blackevilweredragon
- Re: Sony laser questions
- References:
- Sony laser questions
- From: blackevilweredragon
- Re: Sony laser questions
- From: Arfa Daily
- Re: Sony laser questions
- From: blackevilweredragon
- Sony laser questions
- Prev by Date: Re: portable dvd player audiosonic. fault . spindle motor not turning. model KM0502
- Next by Date: Re: Lamp Dimmer
- Previous by thread: Re: Sony laser questions
- Next by thread: Re: Sony laser questions
- Index(es):
Relevant Pages
|