Re: Old Relay



On 2007-03-28 02:30:12 -0700, "Iain Wilkie" <iain@xxxxxxxxxxxxxxxxxxxxxxxx> said:

HI All,

I have a faulty relay on a control card (pretty old). The coil of a relay is
open circuit and the it seems to be with the coil itself (not at the
pigtails).

It is a double pole double throw and the coail voltage is 60 Volts coil
resistance
about 5K. Part number seems to be something like NSF30.6.160 also has
markings on the case TGL, 200,3796, RGI.

Anyone know where I could source something like this or have more info an
manufacture
web link etc,

Thanks in advance

Iain

Post a picture of the relay somewhere and provide a link so we can check it out. Might be similar to one we stock for are arcade games and jukeboxes...

John :-#)#
--
(Please post followups or tech enquires to the newsgroup) John's Jukes Ltd. 2343 Main St., Vancouver, BC, Canada V5T 3C9 Call (604)872-5757 or Fax 872-2010 (Pinballs, Jukes, Video Games) www.flippers.com "Old pinballers never die, they just flip out."

.



Relevant Pages

  • Re: Old automatic gate controller question.
    ... Appears to be 120V ac coil. ... Drawing out schematics of relay equipment is an art in itself. ... the whole system when it is in a defined state, such as "gate closed", ...
    (sci.electronics.repair)
  • Re: old chicago keeps skipping players
    ... I did not hook jumper from Orange-White wire to Gray on Coil. ... Then Outhole relay Re-energizes, ... Outhole De-energizes & kicker fires ejecting ball in outlane. ...
    (rec.games.pinball)
  • Re: old chicago keeps skipping players
    ... I did not hook jumper from Orange-White wire to Gray on Coil. ... Then Outhole relay Re-energizes, ... Outhole De-energizes & kicker fires ejecting ball in outlane. ...
    (rec.games.pinball)
  • Re: old chicago keeps skipping players
    ... I did not hook jumper from Orange-White wire to Gray on Coil. ... Then Outhole relay Re-energizes, ... Outhole De-energizes & kicker fires ejecting ball in outlane. ...
    (rec.games.pinball)
  • TECH: under-PF relay boards for multiplexing wiring-Pinbot
    ... someone wired one or maybe more of the 3 relay boards, p/n C11232-1, ... When I do the coil test I ... goes to another hole next to this one, but it has two orange wires. ... Since I now had no Grd, I jumped a wire to the grd of the bottom board. ...
    (rec.games.pinball)

Quantcast