Re: Repairman's knot


"John E." <incognito@xxxxxxxxx> wrote in message
news:0001HW.C231652802B6B711F01826C8@xxxxxxxxxxxxxxxxxxxxxxxx
http://www.nbndesign.com/stuff/Wirewrap1%20end%20result_320x240.jpg

http://www.nbndesign.com/stuff/Wirewrap2%20first%20turn_320x240.jpg


http://www.nbndesign.com/stuff/Wirewrap3%20all%20turns%20in%20place_320x240.jp

g

http://www.nbndesign.com/stuff/Wirewrap4%20loop%20fed%20thru_320x240.jpg

http://www.nbndesign.com/stuff/Wirewrap5%20loop%20pulled%20over_320x240.jpg

http://www.nbndesign.com/stuff/Wirewrap6%20endgame_320x240.jpg

Thanks so much for posting for the general public. I see it's a slight --
better -- modification on the technique I've used. I like the "push the
loop
through" at the end rather than "push the plug through". In USA the plugs
are
smaller, but still I like your method.

Thanks again,
--
John English


No problem - glad you found it of use. I have to admit that I have been
surprised by the interest in this rather obscure subject, which is why I
never bothered putting the pics up for all to see in the first place, and we
all know where that well-intentioned, but ultimate folly led .... d;~}

Arfa


.

Relevant Pages

  • Re: Repairmans knot
    ... I see it's a slight -- ... better -- modification on the technique I've used. ... through" at the end rather than "push the plug through". ...
    (sci.electronics.repair)
  • Re: Too strange!
    ... >disconnect the only 2 plugs,to plug them back in,and even though I ... You can then push the spring clips back where they were. ... newsgroup does. ...
    (comp.periphs.printers)
  • Re: double-push skate on skis -- getting started
    ... The next day I went out again, and must conclude that although my technique ... is that of double push, ... wheels of my www.crosskate.com actually favor double pushing. ... So now I guess you have to just transfer that to skis and snow? ...
    (rec.skiing.nordic)
  • Re: Getting a Seicento with engine problem
    ... particularly as I've got to push it up the ... That means re-threading the head? ... Actually, Chemical metal with grease on the plug threads, but throughly ...
    (uk.rec.cars.modifications)
  • Re: Small inconspicuous stuff
    ... I push a plug all the way through and hot-glue the seam ... when the plug face is flush with the end of the tube. ... Or do you glue it from outside? ...
    (rec.pyrotechnics)