Re: How to measure High tension of a FBT. . .

You need an HV probe or a stand alone HV meter for testing CRT high tension.
You will not easily or feasibly be able to build your own. There are some
very serious safety issues involved if you were to try to build your own. If
you are going to be in the business of servicing TV sets and monitors, then
you will have to buy the necessary tools to do the job.

--

JANA
_____


"Starflex" <starpippoflex@xxxxxxxxxxxx> wrote in message
news:460c33b7$0$37196$4fafbaef@xxxxxxxxxxxxxxxxxxxxxx
Hello!
If you read the post below (sorry for two post....), I have a E500 Sony
monitor.
I have replaced the varistor that regulate hte high tension of the
FBT...because the previous is quite "cooked"....
So, now I must regulate the high tension to the valour of 27 kV.
I don't have the high tension probe for my meter (they are quite expensive,
and I don' t want purchase their....).
There is any safe method (for example, using a voltage partitor, or
something other!) to measure this voltage with a standard meter?
Thank you!



.

Relevant Pages

  • Re: How to measure High tension of a FBT. . .
    ... I would be very leery about the accuracy of a probe bought on Ebay. ... now I must regulate the high tension to the valour of 27 kV. ... There is any safe method (for example, using a voltage partitor, or ...
    (sci.electronics.repair)
  • How to measure High tension of a FBT. . .
    ... I have replaced the varistor that regulate hte high tension of the ... now I must regulate the high tension to the valour of 27 kV. ... There is any safe method (for example, using a voltage partitor, or ... to measure this voltage with a standard meter? ...
    (sci.electronics.repair)
Loading