repair a viewsonic lcd monitor that keep on/off

I just received a 17 inches viewsonic lcd from my friend
,but it keeps on/off, the green led keep blinking on and off.

I bypass the internal power supply and power the lcd up using an
external power supply and the lcd works great.

If the internal power have no load(not connected to video board), the
12V output is stable.
But once it connected, the voltage keeps jumping up and down (0-12V)

I also check the all of the caps with esr meter, they are good.
All of the diodes have passed the diode test on the multimeter.
Threre are no visual damage to the board.

i know lcd are cheap now and repair is not costworthy, but i want to
learn.

Any suggestion of what cause the internal power supply to fail under
load?
What parts should i check?
Anyone familiar with the lcd power supply?

.

Relevant Pages

  • Do power supplies in shut down come on briefly?
    ... or the video board on an LCD TV. ... found the 5 volts stand by voltage was working fine, ... briefly come up if something on the video board is causing my power ... output rail from the power supply to see if they start to try to come ...
    (sci.electronics.repair)
  • 16x9 aspect ratio display
    ... I'd like to know what brand/model of ... LCD and video board you're using and if you like it. ... Any glitches during ...
    (Fedora)
  • power the LCD board with a computer ATX power???
    ... I have a lcd monitor with bad internal power supply. ... is responsible for 12V to the video board. ... video board and turn on the LCD and verify the condition of video ...
    (sci.electronics.repair)
  • Re: power the LCD board with a computer ATX power???
    ... is responsible for 12V to the video board. ... 11.56- 12.45V and causes the LCD to shut down and restart every 0.5 ... Can i use a computer PC ATX power supply 12V to power the ... but that voltage range you're seeing shouldn't be a problem. ...
    (sci.electronics.repair)