Re: NEWBIE: Philips 8p6054 projection TV convergence issue??

Sounds more like contaminated coolant in the green and blue tubes. Look
into them with a flashlight and see if it is clear or cloudy. Very common
on these sets.

Leonard

"mooner" <mooner@xxxxxxxxx> wrote in message
news:1177942450.652333.9940@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hi all, Everything I have read so far in this group seems to point to
a convergence issue, perhaps someone can confirm and help me thru the
service convergence menu...

SYMPTOM: Colors are not vibrent, never seem to match real life.
Looks good on one type of picture and then looks bad on another.
Also when doing the consumer convergence there is a RED fringe on the
bottom of the + that red fringe is about 3/4 of the way down the TV
and it seems that you can sometimes see it if you try hard while the
tv is on a channel. There is no doubling or shadowing of images, just
not sharp and bad colors.

HELP WITH: I went into the service convergence menu but became a
little lost. It looks like it walks you thru step by step but was
unsure right off the bat with the geometry questions. could someone
give me a quick walkthru? advice? help?

QUESTION: If the lenses inside and mirror are really dusty does that
have a big effect on the picture sharpnes?

Thanks

Dave



.

Quantcast