Re: DENON Home Cinema receiver to repair



Hi Mark,

Thanks for your reply Mark, and trying to help me, here is the symptom:
At power up just after the init the protection circuit goes up and the power
supply LED start to flash red.
I'm sure of my CABASSE speakers as they are working well on my second
AVR-2105.

pf


"Mark D. Zacharias" <spammenot@xxxxxxxxxxxx> a écrit dans le message de
news: 4Zo7i.6749$5j1.1700@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Pierre-François wrote:
Hi Mark,

If I've tech qualifications? My got! Yes for sure!
I'm engineer graduated in electronic and my personal lab is fully
equiped from DC up to 40Ghz !
I'm also ham radio operator... F5BQP

This receiver failed for the second time, firstly under warranty two
years ago and just recently!
I send it for repair to DENON, but for the third time I'll put my
noise in it otherwhise it'll cost me more than a bran new one...
DENON sent me the repair quote: 210 Euro and last week I got the same
one on ebay for 270 Euro!...
So now I'll have two rigs and I need to find out the
schematics/drawings for the third time... lol...

Thanks for your post.
pf



"Mark D. Zacharias" <spammenot@xxxxxxxxxxxx> a écrit dans le message
de news: f7A6i.4785$C96.3795@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Pierre-François wrote:
Thanks John, I've tried but nothing for the 2105 here...
pf


"John E." <incognito@xxxxxxxxx> a écrit dans le message de news:
0001HW.C27F057900601906F01826C8@xxxxxxxxxxxxxxxxxxxxxxxx
My DENON AVR-2105 home cinema receiver failed for the second time
so I would
like to try to repair it myself, as now it's going to cost me more
than a brand new.
Where can I get the service manual with the drawings for this rig?
Many thanks for your help.
pf

<http://www.eserviceinfo.com>

Enter "AVR-2105" and "Denon" in the Mfg field. Several manuals come
up, but
not one for the 2105. But maybe you can get some idea from one of
those manuals how to diagnose the problem.

Good luck,
--
John English

So what is the receiver doing wrong, and have you any technical
qualifications? No disrespect, but people often get in over their
heads on these things.

Mark Z.

Well, you still did not answer my question - what exactly is the receiver
doing wrong?

And since you do possess some qualifications, I could send you the PDF,
though their electronic service manuals aren't the best.

BTW to Malissa. I am an authorized Denon servicer, and pretty well versed
in their surround receivers.


Mark Z.



.



Relevant Pages

  • Re: DENON Home Cinema receiver to repair
    ... Thank you Jean-Paul, Mark, the "reversing" escaped my neuron... ... This is the SMTP Server program at host orange.fr. ... This receiver failed for the second time, ... though their electronic service manuals aren't the best. ...
    (sci.electronics.repair)
  • Re: DENON Home Cinema receiver to repair
    ... Thanks for your reply Mark, and trying to help me, here is the ... the power supply LED start to flash red. ... This receiver failed for the second time, ... though their electronic service manuals aren't the best. ...
    (sci.electronics.repair)
  • Re: DENON Home Cinema receiver to repair
    ... Thanks for your reply Mark, and trying to help me, here is the ... the power supply LED start to flash red. ... This receiver failed for the second time, ... though their electronic service manuals aren't the best. ...
    (sci.electronics.repair)
  • Re: 3801 denon receiver
    ... Mark D. Zacharias wrote: ... display, no standby light, no click when you hit power switch ... I have checked all 7 fuses on the receiver with an ohm ...
    (sci.electronics.repair)
  • Re: Back to fundamentals
    ... This gives the power collected by the receiver as 6.4mW. ... power in the load of a matched receiving antenna to the power applied to ... Now we can split the model exactly in half with a ground plane. ...
    (rec.radio.amateur.antenna)

Loading