Re: Bosch SHX56B06UC dishwasher won't drain


"Dan" <none@xxxxxxxxxxx> wrote in message
news:m46dnfsri_IAzMPbnZ2dnUVZ_j6dnZ2d@xxxxxxxxxxxxxx

Thanks for the reply. Yes, it does spray. I agree the pump seems the
likely culprit. Since it makes pump-like noise on cancel-drain, I'm
guessing it's not the electronics that tell the pump to turn on. The
thing is, I kinda hate this machine's design. It's really quiet, but the
rack layout sucks IMHO & it's SMALL. If it's a relatively easy/cheap fix,
I'd probably go for it, otherwise I'd just as soon get another kind.

There's usually a solenoid valve that switches the pump from spray to empty.
I'd look at that.

Otherwise

http://freecycle.org/

or

http://www.craigslist.org/

for a free one.


.

Relevant Pages

  • Re: Regulating pump pressure
    ... | supplied to appliances with somewhat specific voltage and amperage ... Certainly true for electronics, and possibly for a rotary pump. ... |>>> pressure during the brewing processby regulating the electricity going ...
    (alt.coffee)
  • Re: Regulating pump pressure
    ... >Certainly true for electronics, and possibly for a rotary pump. ... running it on a slightly lower voltage would lengthen ... I have an old Dremel tool speed control out in the garage, ...
    (alt.coffee)
  • Re: Hydraulic press and load cells
    ... I don't understand your fear of electronics in combination whit fireworks. ... Besides the obvious hazard from sparks in the engine (that is too far away ... and so on) to calculate how much power needs to be fed into the pump motor. ... The pump motor power controller is, of course, located very close to the ...
    (rec.pyrotechnics)
  • Re: Bilge Alarm Advice needed
    ... motor current, which will be low if the pump is dry, but high if the pump ... electronics shuts it back down until it times out again. ... seconds if dry. ... just an series small resistor to sense motor current and a custom ...
    (rec.boats.cruising)
  • Bosch SHX56B06UC dishwasher wont drain
    ... guessing it's 5 or so years old, though I can't find a manufacturing date on ... now the pump will not drain the machine. ...
    (sci.electronics.repair)