Re: hair dryer thermal fuse; what temperature?



peter <nospam@xxxxxxxxxx> wrote in message
news:wL_ti.5169$fk4.2241@xxxxxxxxxxx
what is the typical cutoff temperature of the thermal fuse inside a hair
dryer?

the label on it has been partially burned off and is unreadable


http://www.comstatinc.com/thermalcutoffs.cfm


I guess the fuse blew because I used it inside my blankets (to quickly
warm
the bed).



What temperature do you think a human/ human hair can stand ?

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/





.



Relevant Pages

  • Re: hair dryer thermal fuse; what temperature?
    ... the label on it has been partially burned off and is unreadable ... Well the fuse is there for safety purposes and not to regulate the temp. ...
    (sci.electronics.repair)
  • Re: Electric dryer - thermal fuse question
    ... Our Sears electric dryer went completely dead about 2 seconds after ... power even to the 10 watt light inside the drum. ... on that thermal fuse that flips between .5 and .6 ohms. ...
    (sci.electronics.repair)
  • Re: Electric dryer - thermal fuse question
    ... Our Sears electric dryer went completely dead about 2 seconds after ... power even to the 10 watt light inside the drum. ... on that thermal fuse that flips between .5 and .6 ohms. ...
    (sci.electronics.repair)
  • Re: merge is pulling in every other record?
    ... As Peter said in an earlier post if you toggle on the display of the field ... and BEFORE the first Merge field in every label EXCEPT the first - something ... {MERGEFIELD name} ... "Peter Jamieson" wrote: ...
    (microsoft.public.word.mailmerge.fields)
  • Re: UL & fuse rating
    ... The fuse I've selected is a 5mm pigtail, 1.5amp fast action rated at 250V. ... Your label ratings are the problem - they should reflect AC nominal ... subtracts margins for evaluation to reflect typical line voltage ... voltages plus and minus similar margins. ...
    (sci.electronics.design)