Re: DENON AVR3300 no FM reception



I have sent a diagram of the tuner section to your gmail address. A quick
glance suggests that pin 5 is the voltage contolled tuning input;
transistors TR 505 and 504 appears to be the AM and FM switches.

Mark Z.

"Brasto" <bram.stolk@xxxxxxxxx> wrote in message
news:1189445251.055375.150880@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
I like to restore the FM reception to normal ops. So far I have
diagnosed that AM reception/tuning is in good condition. In the FM
mode no IF signal is getting to pin 1 of the IC LA1265 so I belief
that the little tuner block is at fault. I managed to remove the
shielding covers to get access to the tuner section which really
exposed a jungle of SMT devices.
To find my way around this multigang-ed tuner I hope that some one can
provide me with a copy of the DENON FM front end or any help to
troubleshoot the receiver

Thanks
Bram



.



Relevant Pages

  • Re: DENON AVR3300 no FM reception
    ... mode no IF signal is getting to pin 1 of the IC LA1265 so I belief ... that the little tuner block is at fault. ... does NOT provide the B+ and the Tuning Voltage is stuck at B+ value. ... need to know Type/PN of the SMD switch at PCB ...
    (sci.electronics.repair)
  • Re: DENON AVR3300 no FM reception
    ... mode no IF signal is getting to pin 1 of the IC LA1265 so I belief ... that the little tuner block is at fault. ... does NOT provide the B+ and the Tuning Voltage is stuck at B+ value. ... switch +12 VDC when so commanded. ...
    (sci.electronics.repair)
  • Re: DENON AVR3300 no FM reception
    ... transistors TR 505 and 504 appears to be the AM and FM switches. ... mode no IF signal is getting to pin 1 of the IC LA1265 so I belief ... that the little tuner block is at fault. ... does NOT provide the B+ and the Tuning Voltage is stuck at B+ value. ...
    (sci.electronics.repair)
  • Re: DENON AVR3300 no FM reception
    ... transistors TR 505 and 504 appears to be the AM and FM switches. ... mode no IF signal is getting to pin 1 of the IC LA1265 so I belief ... that the little tuner block is at fault. ... does NOT provide the B+ and the Tuning Voltage is stuck at B+ value. ...
    (sci.electronics.repair)
  • Re: Question in TvTuner for TESTCAP driver
    ... You can't just grab a sample from the DDK and start modifying it. ... Pin names are hardcoded based on pin types. ... fixing tuner propety processing logic. ... etc. are reported by the tuner through tuner propety set. ...
    (microsoft.public.development.device.drivers)