Re: Lexmark 3200 MFP DC Power Connector Pin Out

On Fri, 12 Oct 2007 23:31:49 +1000, Ian Munro <imunro@xxxxxxxxxxxxxxx>
put finger to keyboard and composed:

I have a Lexmark 3200 MFP. It has a 4-pin din connector and requires
24VDC 1.5A.

I don't have the power supply and I don't have the pin out for the
connector.

Can anyone help me with the pin-out for the connector or point me a
source for low-cost spares. I am in Singapore.

Alternatively, could someone explain how I might figure out the pin
out for the connector without damaging the MFP?

Tx

Test for continuity between the DIN and USB connectors. That will
probably identify the ground pin(s).

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
.

Relevant Pages

  • Re: what is the voltage tolerance for a iie?
    ... the keyboard ground wire (pin 13 of the connector) is broken, ... the other keys are also shorted! ... This is pin 7 of the ...
    (comp.sys.apple2)
  • Re: Unpacked 800 after 15 yrs. Boots but keyboard unresponsive
    ... Something like a row or double row of 1" pins that went clear through the connector. ... The keyboard circuit uses two 4049 or 4050 hex buffers to sense the keyboard, ... The only other IC necessary for the keyboard is the Pokey 40 pin device. ... AFAIK the Pokey never changed so even one from a 65XE or 5200 game system would work. ...
    (comp.sys.atari.8bit)
  • Re: Howto null modem an Ultra 1 to a PC?
    ... >with it remotely (putting away the monitor, keyboard and mouse). ... >be able to do full remote administration. ... pin 5 is shortened to protective ground. ... You don't say what size connector you already have on your mouse ...
    (comp.sys.sun.hardware)
  • re: Megahertz PCMCIA Ethernet dongle
    ... PCMCIA Ethernet and dongle, ... ability to disassemble a delicate connector using ... The PCMCIA 68 pin connector ...
    (sci.electronics.repair)
  • Re: psu requirements-think i found it
    ... :: jump from 20 pin to 24 pin? ... Ian, you can use a 20 pin power supply, on a 24 pin connector motherboard. ... and even less of an issue for the 12V rail. ...
    (alt.comp.periphs.mainboard.asus)