Re: Fast removal of FBT's Was: De-soldering ICs with a hot air gun.
- From: Clint Sharp <clint@xxxxxxxxxxxxxxxxxxxx>
- Date: Mon, 22 Oct 2007 20:11:18 +0100
In message <zk%Si.119$yV6.94@xxxxxxxxxxxxxxxxxxxxxxxxxx>, Mark D. Zacharias <mzacharias@xxxxxxxxxxxx> writes
Just had to tell someone - I got a bright idea to remove a flybackWeller instant heat soldering gun, length of heavy gauge copper wire in place of the normal tip bent into the outline of the pins, works wonderfully. As for the heat gun desoldering ICs, I recommend a Steinel variable heat gun, used to work on lots of expensive IBM motherboards using one of these to pre-heat or desolder chips.
transformer using a paint stripper gun.
AMAZING. Had that FBT out of there in about 40 seconds - no need to fight
the thing clearing eyelets, etc.
Done it twice now. Works great. Surely someone here has done this, But I
work with a couple really experienced TV techs and they hadn't thought of it
before...
I would recommend watching out for any nearby SMD's, though...
Mark Z.
--
Clint Sharp
.
- References:
- Re: De-soldering ICs with a hot air gun.
- From: hr(bob) hofmann@xxxxxxx
- Fast removal of FBT's Was: De-soldering ICs with a hot air gun.
- From: Mark D. Zacharias
- Re: De-soldering ICs with a hot air gun.
- Prev by Date: Question about changing power supply for Sony FD Trintron KV32FS17 TV
- Next by Date: Re: Bose Wave Radio
- Previous by thread: Re: Fast removal of FBT's Was: De-soldering ICs with a hot air gun.
- Next by thread: Re: Fast removal of FBT's Was: De-soldering ICs with a hot air gun.
- Index(es):
Relevant Pages
|