Re: SONY KE-42M1 Plasma problem


"William Sommerwerck" <grizzledgeezer@xxxxxxxxxxx> wrote in message
news:yaGdnRh_48-5j9nanZ2dnUVZ_quhnZ2d@xxxxxxxxxxxxxx
"jango2" <crow_slapper@xxxxxxxxxxx> wrote in message
news:3cafdfcb-8f3b-4595-9218-68389cfe153c@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
While most servicing is done that way, it's certainly not the "only" way
to
do it. I've heard quite a few reports right here in this group of people
doing component level service on flat panel sets.

Bang on ! I may take 15 days to fix an lcd or plasma but i'm doing it
component level.
Some of the faults i've seen:
100k chip resistors that measure 100 k with a meter but measure
lower in circuit when powered up causing SOS ...power trip.
Broken track from one controller going to another , that too mid
layer in the pcb.
Dry electrolytics , thats a normal one.
Busted MOSFETS
Defective panel blowing precious panel driver ics and a hole
in my wallet :(
Bad optocouplers in PS

I love the fact that most authorised service centres are strictly
prohibitted from carrying out chip level repairs. Gives us a
competitive edge. Better pricing and quicker delivery. They have
to wait 6 weeks for those boards.

I admire someone with the patience to track down these problems to the
component level. I enjoy servicing equipment, but I don't have quite that
much patience.


We most often get the boards the next day. We're a Sony SES warranty center,
and they really get those things out fast. 2nd day air is standard shipping,
but since we're only about 200 miles from Kansas City we still usually get
them the next day, at no charge for freight.
Out-of warranty repairs will be a problem down the road however.

The rush-rush nature of warranty repairs means we wouldn't have time for
component-level troubleshooting of plasma or lcd in most cases. We're
required to get those things done fast. Even extended warranty companies
are really pressing us on the time issues. Sometimes it is necessary to
order all the boards and return the ones that didn't fix it. Panels take
longer though, since they come by freight carrier and not DHL or UPS.

Still mostly component level for audio repairs however...

Mark Z.


.

Relevant Pages

  • Re: SONY KE-42M1 Plasma problem
    ... doing component level service on flat panel sets. ... 100k chip resistors that measure 100 k with a meter but measure ... Defective panel blowing precious panel driver ics and a hole ... Out-of warranty repairs will be a problem down the road however. ...
    (sci.electronics.repair)
  • Re: SONY KE-42M1 Plasma problem
    ... doing component level service on flat panel sets. ... Defective panel blowing precious panel driver ics and a hole ... The rush-rush nature of warranty repairs means we wouldn't have time for component-level troubleshooting of plasma or lcd in most cases. ... Sometimes it is necessary to order all the boards and return the ones that didn't fix it. ...
    (sci.electronics.repair)
  • Re: SONY KE-42M1 Plasma problem
    ... doing component level service on flat panel sets. ... Defective panel blowing precious panel driver ics and a hole in my ... prohibitted from carrying out chip level repairs. ...
    (sci.electronics.repair)
  • Re: SONY KE-42M1 Plasma problem
    ... doing component level service on flat panel sets. ... 100k chip resistors that measure 100 k with a meter but measure ... Defective panel blowing precious panel driver ics and a hole ...
    (sci.electronics.repair)
Quantcast