Re: Repair ATX power supply

Long time ago I wrote the following scheme:

That looks excellent, I'll have a read through and see if I can find the
problem..

A quick question about transformers... mine has 4 of them in total, a small
one near the big capacitors, then two more small ones and a really huge one
(like 4x the size of the rest) near the power transistors.. I was comparing
model numbers with a photo of a simmilar supply, and they both seem to have
the following numbers in their model:

Smallest transformer: 16 (WIN-16LA)
Small transformer: 19 (WIN-19L)
Really big transformer: 35 (WIN-35P)

Are these numbers for one of the voltages or what ?

Here's the pic I was comparing with - different brand, but the layout of
components is almost identical to mine:

http://www.oakpc.com/mimg/eart/images/041221oak0235.JPG

Regards,
Chris


.

Relevant Pages

  • Train speed
    ... This is for future reference but when my layout is finished I'm planning ... is it O.K. to run at low speeds for extended periods ... Would it be hard on the loco or transformer or does it make any ... I did put grades in, ...
    (rec.models.railroad)
  • Re: New installation trouble
    ... The transformer should not be acting up because of a long wire run. ... would merely reduce the voltage at the end and dim the lights. ... I used brand new cable, 12-2 to the bollard, 16-2 to the light ...
    (alt.home.repair)
  • Tech: New DMD And My Machine Wants To Catch On Fire!
    ... Street Fighter and now the transformer is getting hot. ... The brand is ... Can replacing a DMD cause this? ...
    (rec.games.pinball)
  • Re: Shielded power-transformer
    ... I have 4 cm between the transformer and the summing ... network - no way to change the layout. ...
    (sci.electronics.basics)