Re: Extension cable for SD card socket?

From what we have been told in the past, the SD card itself cannot be
extended because its buss is critical. If you have a device using a
USB to SD conversion, the USB portion can be extended to some degree.

The Plasma TV that I have, has the card reader right on the front
panel located just next to the controls.


Jerry G.
======




On Nov 26, 9:29 pm, "Mr. Land" <grafton...@xxxxxxxxx> wrote:
Would anybody know if any company sells an extension cable for an SD
card socket? Our new plasma TV has a socket for displaying pictures
stored on an SD card, but it's located in the back of the TV, and is
very hard to get to because there's almost no clearance between the
TV's sides and the entertainment center it sits in. I'm hoping to
find some sort of extension cable that I can plug into the rear slot,
run the socket end of the cable to the front, then plug SD cards into
that.

Thanks for any help.

.

Relevant Pages

  • Re: faulty headphone socket in Cardbus?
    ... it is only the headphone socket in the card that crackles. ... If I move the plug around in the socket a bit there's a position ... Your jack is worn out. ... You wipe some contact cleaner on the plug and work it around in the ...
    (rec.audio.pro)
  • Re: DVI problems
    ... It means that your card and monitor are identical ... card has socket a for plug a::monitor has plug a for socket a ...
    (microsoft.public.windows.inetexplorer.ie6_outlookexpress)
  • Extension cable for SD card socket?
    ... Our new plasma TV has a socket for displaying pictures ... stored on an SD card, but it's located in the back of the TV, and is ... find some sort of extension cable that I can plug into the rear slot, ...
    (sci.electronics.repair)
  • Re: Is it possible to sync from a remote cradle?
    ... Actually, it looks like Socket also has an Ethernet CF card, that you ... can plug a network cable directly into. ...
    (microsoft.public.pocketpc.activesync)
  • Re: SDS PROM-100 software
    ... 2708 EPROM and to consistently read the content of another used 2708 ... card which worked great with Dave Dunfield's RAMless ROM monitor ... socket) with the IA 1010B the 2708 simulator has been a disaster. ... First the original IA 1010B used a weird and probably damaged 24 pin ...
    (comp.os.cpm)