Re: Samsung 43" rear projection.
- From: Jamie <jamie_ka1lpa_not_valid_after_ka1lpa_@xxxxxxxxxxx>
- Date: Thu, 29 Nov 2007 19:32:14 -0500
Dani wrote:
Model # HC-R4351WX/XZC. Chassis # P60BSure, Check the HOT Section and fly back maybe! :)
Dead, won't come on, led is on at standby, & just flashes at turn with
remote, indicating SMPS is ok, & getting signal to turn on. Unplug
connector CNZ04 from convergence, pop in speakers, tries to start, but
shuts right down. Sanyo STK 394-250 IC's seem ok, & all fusible
resistors check fine. Can't get at the board to do measurements,
without removing it totally. No leaks.
Anything common on this model? Dani.
--
"I'd rather have a bottle in front of me than a frontal lobotomy"
http://webpages.charter.net/jamie_5
.
- References:
- Samsung 43" rear projection.
- From: Dani
- Re: Samsung 43" rear projection.
- From: Dani
- Samsung 43" rear projection.
- Prev by Date: Re: Sony DLP.
- Next by Date: Sharp LC-37HV6U, which DVI cable fits?
- Previous by thread: Re: Samsung 43" rear projection.
- Next by thread: Toshiba DLP.
- Index(es):
Relevant Pages
|
|
