Re: Samsung LCD Syncmaster 171V



Wayne wrote:
On Thu, 29 Nov 2007 20:48:56 -0800, Max <maxg70@xxxxxxxxxxxx> wrote:

Hi This monitor model code GH17LSSBY or model name 171V has power up but white screen.I checked the power supply.There are few voltages coming out to logic board(5v,16v)I suspect bad logic board.Is anybody have the same problem?thanks

From another forum, in answer to the problem of an lcd with a white
screen...

"Might be the electronics, but the majority of the time I have
experienced this it is a small fuse in the lcd panel it's self when
you get a snow-white screen.

Not sure what panel the 1520 has in it, but the fuse would be under
the small metal cover right on the back of the LCD panel on the driver
board, might be as small as a pin-head, right by the connector, may be
labeled F1 or FU1 or something like that. You can check it with a
multimeter, and hopefully if it is bad there are some markings on it,
maybe a letter or two, that can be used to cross-reference a
replacement.

Probably 9 out of 10 times (in my experience) the fuse is the only
problem, replacing it returns the unit to operation."

Might be your problem.

Wayne
thats exactly what you saying.The problem with the fuse F1.I'd like to know what value the fuse I can install (what amperage)Thanks
.



Relevant Pages

  • Re: Samsung LCD Syncmaster 171V
    ... white screen.I checked the power supply.There are few voltages coming out to logic boardI suspect bad logic board.Is anybody have the same problem?thanks ... Not sure what panel the 1520 has in it, but the fuse would be under ... the small metal cover right on the back of the LCD panel on the driver ... replacement. ...
    (sci.electronics.repair)
  • Re: Samsung LCD Syncmaster 171V
    ... out to logic boardI suspect bad logic board.Is anybody have the ... Not sure what panel the 1520 has in it, but the fuse would be under ... the small metal cover right on the back of the LCD panel on the driver ... replacement. ...
    (sci.electronics.repair)
  • Sort of a repair log; fixing up a craigslist Alien Poker project
    ... been hunting for a replacement; looks like this one will do just fine. ... Double-checked all fuse values, replaced several fuses for being rated too high. ... Replaced burnt kicker coil with spare used coil. ... Reassembled outhole switch ...
    (rec.games.pinball)
  • TECH - Indiana Jones blowing fuse F111
    ... Unplug J107 and fuse F111 no longer blows ... Some solenoids are also wired through J107 but are fused ... J106 could also be suspect as it ... Also if F111 was blowing with J107 ...
    (rec.games.pinball)
  • Re: TECH - Wrong code updated to FGY now no ejects
    ... Months ago I got a replacement CPU board for my WPT. ... I noticed the POTC display and immediately loaded the 1.12 WPT ... loading software from a different game than is currently installed. ... You have in all likelihood blown a fuse. ...
    (rec.games.pinball)