Re: Hard drive gets no power

From: Eeyore <rabbitsfriendsandrelations@xxxxxxxxxxx>
Date: Sun, 09 Dec 2007 17:19:47 +0000

"mejasiu@xxxxxxxxx" wrote:

Hi all,

I have a Western Digital WD800 80 GB drive. I am not sure why the
drive will not power up. Here are the specs on the drive:

LBA 156301488
80.0GB

MDL: WD800JB - 00FMA0
DATE: 21 APR 2004
DCM: HSBANAJAB

What would I need to be able to fix this drive?

A hard drive factory's specialised test jigs and fixtures.

Bin it.

Graham

.

References:
- Hard drive gets no power
  - From: mejasiu@xxxxxxxxx

Prev by Date: Re: Win XP goes off after 30 days
Next by Date: Re: six pulse bridge rectifier
Previous by thread: Re: Hard drive gets no power
Next by thread: Re: Hard drive gets no power
Index(es):
- Date
- Thread

Relevant Pages

Re: Oh Teacher?
... Digital Playback Specs: ... Audio System:Digital audio format =DTS digital output, ... Input signal for maximum output power: ... Panasonic DVD player and the second player specs in this post are of the ...
(rec.audio.tech)
Re: Oh Teacher?
... Digital Playback Specs: ... Audio System:Digital audio format =DTS digital output, ... Input signal for maximum output power: ... say compared to a player with thse specs run into the same amp remmebering ...
(rec.audio.tech)
Re: Voltage supply for CNC
... I'm not an electrician or electrical engineer; but I do just sorta happen to design and build CNC machine tools, ... The power grid in most of the US is nominally 220VAC; but started stepping up to 230, and then 240, then even slightly higher, about 20 years ago. ... The power companies can deliver more power through the same old wires if they increase voltage and keep amperage the same. ... 200 and 400 volt systems are Japanese, and I'm not aware of any safe way to run a machine with those specs except through a transformer. ...
(alt.machines.cnc)
Re: Sizing a power supply
... Get the biggest you can afford but certainly not less than 500 watts. ... Stick to Antec, Enermax, PC Power and Cooling, OCZ, ... I also know that the CPU will use max of 65w (per specs), ...
(alt.comp.hardware.pc-homebuilt)
Re: Yamaha vs Pioneer vs Harman Kardon
... Is the Yamaha I mention a "High Current" receiver? ... capability is its power output will double as the load impedance halves ... The value of a "high current" amp is quite dependent on your speakers. ... But take a look at the 3 Recievers specs. ...
(rec.audio.opinion)