Re: Tektronix 2230 Power Up Failure
- From: dodger741 <dodger741@xxxxxxxxx>
- Date: Fri, 25 Jan 2008 21:21:56 -0800 (PST)
IIRC,2230 had a lithium coin cell holder on the top digital board,or
a 123 lithium cell underneath the top digital board.(soldered to it)
Thanks for the quick response... Is the board you are referring to
the one that has the plastic hinges for tilting the board up. Do you
think the battery might be associated with the message I am getting as
I suggested?
Roger
yes,it's the only board on the top of the instrument.
I don't know about the error messages.It's very possible.
Those batteries only have a 10 yr shelf life.
The 2230 has been out of support longer than that.
--I disassembled the unit and looked on both sides of the board. Nothing to be found that looks like a battery. There are two daughter boards attached to the back but they look like some sort of high frequency analog boards because of the metal shield. Strange to think that their is a built in message that they don't mention in the manual! I may never know.
Jim Yanik
jyanik
at
kua.net
.
- Follow-Ups:
- Re: Tektronix 2230 Power Up Failure
- From: Pierre-François
- Re: Tektronix 2230 Power Up Failure
- References:
- Tektronix 2230 Power Up Failure
- From: dodger741
- Re: Tektronix 2230 Power Up Failure
- From: Jim Yanik
- Re: Tektronix 2230 Power Up Failure
- From: dodger741
- Re: Tektronix 2230 Power Up Failure
- From: Jim Yanik
- Tektronix 2230 Power Up Failure
- Prev by Date: Re: is there a way to increase the light of an LED with a dial?
- Next by Date: Re: is there a way to increase the light of an LED with a dial?
- Previous by thread: Re: Tektronix 2230 Power Up Failure
- Next by thread: Re: Tektronix 2230 Power Up Failure
- Index(es):
Loading