Re: Sony 32" TV with colored upper corners

Arjan

I've had this problem with Sony sets having bad purity on
the lower left corner. Moving the set around the room to
realign relative to the Earth's magnetic field only helped
a little. Yes, in this case, it was the tube, it had to
be replaced.

Colin





Arjan wrote:
On 6 feb, 17:26, Arjan <d...@xxxxxxxxx> wrote:
Hi,

I got a TV from somebody, a Sony KV-32WS3D (chassis AE-3)
The upper corners are very colored, see this picture from a teletext
page which should only contain the colors white and blue:http://img182.imageshack.us/img182/6980/dsc03030pg9.jpg

I checked the degauss coils: OK, PTC also OK, the degauss sound can be
heard when the unit is switched on
The deflection yoke was a little bit loose, when I moved it on the
neck of the CRT the colors on the screen are changing but I cannot
get the right colors in the upper corners, in every position of the
yoke, very strange....
There are no magnets from e.g. speakers in the neighbourhood.
The support rubbers for the yoke are still in place except one. But in
every position of the yoke there are colored upper corners....

There are more coils around the CRT: rotation coil. After
disconnecting this one, still bad colors
Another coil is connected to a small PCB at the right side of the
chassis.
Near the connector I read: CY+ and CY- Is this a convergence coil?

Convergence is still OK, only that colored corners...
(oh yes, sometimes several channels are not showing picture, only snow
or a snowy picture)
After a while the picture comes back. I think a bad contact inside the
tuner....)

I cannot believe there is something wrong with the CRT itself.....

Regards,

Arjan

correct link to the picture: http://img182.imageshack.us/my.php?image=dsc03030pg9.jpg
.

Relevant Pages

  • Re: How to eliminate horizonal overscan when no service adjustment?
    ... inductance in series with the horizontal deflection ... down the rate of change in the yoke, ... Any idea what kind of coil I would need to add? ... by a few volts will shrink the picture all round. ...
    (sci.electronics.repair)
  • Sony 32" TV with colored upper corners
    ... The upper corners are very colored, see this picture from a teletext ... The deflection yoke was a little bit loose, when I moved it on the ... There are more coils around the CRT: ...
    (sci.electronics.repair)
  • Re: TECH: Star Wars tearing
    ... Do you have another amplifone deflection board to toss into the cab? ... another cab you can check the yoke in? ... "Keep in mind the picture would display perfect on the osciliscope (if ... mode to the X and Y outputs of the PCB and the picture is fine? ...
    (rec.games.video.arcade.collecting)
  • Re: CV new flipper coil,now blows fuse F116 - new guy help
    ... Turns out I just realized that I have a great picture of the flipper ... then move to the two diodes on the coil (since ... The EOS should be compensated for, I will fix than once I fix the ... BUT, since we are here, I replaced the actual switch which was bad ...
    (rec.games.pinball)
  • Re: Purity problem in Panasonic TV
    ... purity problem at both sides of top of the picture. ... or misaligned yoke or some missing/fallen magnets. ... Is the degaussing circuit working. ...
    (sci.electronics.repair)