Re: Identifying a Connector ...


"Arfa Daily" <arfa.daily@xxxxxxxxxxxx> wrote in message
news:valBj.7582$5i5.7050@xxxxxxxxxxxxxxxxxxxxxxx
Does anyone know for sure who the manufacturer is, of the 2.5mm pin-pitch
box connectors on the Vestel PW15 series power supplies used in many makes
of LCD TV ( Hitachi, Toshiba, Sanyo etc) ? They are the type with a recess
cut into one side of the box, and which take a plug with a polarising bump
at each end, set the same distance apart as the recess. Large variety of
'ways' from a couple right up to 13 or more. Pins are also offset closer
to one long face of the box, than the other, so this, along with the bumps
and the recess, ensure that a plug can only be inserted into a socket, the
right way round.

There doesn't seem to be any manufacturers name or logo on them that I can
see, and although I've found some 2.5mm examples in catalogues, none that
are exactly enough the same, to be useable with existing connectors.

Arfa

No particular experience of this equipment, but JST and JAE are both popular
manufacturers of connectors in Japanese equipment; maybe worth checking out
their catalogues.
Martin
--
martin<dot here>whybrow<at here>ntlworld<dot here>com


.

Relevant Pages

  • Re: Identifying a Connector ...
    ... set the same distance apart as the recess. ... that are exactly enough the same, to be useable with existing connectors. ... popular manufacturers of connectors in Japanese equipment; ... checking out their catalogues. ...
    (sci.electronics.repair)
  • Re: Identifying a Connector ...
    ... set the same distance apart as the recess. ... Pins are also offset closer ... to be useable with existing connectors. ...
    (sci.electronics.repair)
  • Identifying a Connector ...
    ... Does anyone know for sure who the manufacturer is, ... cut into one side of the box, and which take a plug with a polarising bump ... set the same distance apart as the recess. ... to be useable with existing connectors. ...
    (sci.electronics.repair)
  • Re: Identifying a Connector ...
    ... cut into one side of the box, and which take a plug with a polarising bump ... set the same distance apart as the recess. ... to be useable with existing connectors. ...
    (sci.electronics.repair)
  • Re: Identifying a Connector ...
    ... cut into one side of the box, and which take a plug with a polarising bump ... set the same distance apart as the recess. ... the recess, ensure that a plug can only be inserted into a socket, the right ... to be useable with existing connectors. ...
    (sci.electronics.repair)