Re: Identifying a Connector ...


"JW" <none@xxxxxxxx> wrote in message
news:vtkct3tbstuhtvjbk0q451itpqcj34bbu9@xxxxxxxxxx
On Tue, 11 Mar 2008 01:23:39 GMT "Arfa Daily" <arfa.daily@xxxxxxxxxxxx>
wrote in Message id: <valBj.7582$5i5.7050@xxxxxxxxxxxxxxxxxxxx>:

Does anyone know for sure who the manufacturer is, of the 2.5mm pin-pitch
box connectors on the Vestel PW15 series power supplies used in many makes
of LCD TV ( Hitachi, Toshiba, Sanyo etc) ? They are the type with a recess
cut into one side of the box, and which take a plug with a polarising bump
at each end, set the same distance apart as the recess. Large variety of
'ways' from a couple right up to 13 or more. Pins are also offset closer
to
one long face of the box, than the other, so this, along with the bumps
and
the recess, ensure that a plug can only be inserted into a socket, the
right
way round.

There doesn't seem to be any manufacturers name or logo on them that I can
see, and although I've found some 2.5mm examples in catalogues, none that
are exactly enough the same, to be useable with existing connectors.

Could it be this:
http://www.jst-mfg.com/product/pdf/eXH.pdf
If so, Digikey has 'em.


A - Ha ! That looks pretty damned close if not exact ! Now all I need to do
is find a stockist in the UK ...
Thanks for the pointer.

Arfa


.

Relevant Pages

  • Identifying a Connector ...
    ... Does anyone know for sure who the manufacturer is, ... cut into one side of the box, and which take a plug with a polarising bump ... set the same distance apart as the recess. ... to be useable with existing connectors. ...
    (sci.electronics.repair)
  • Re: Identifying a Connector ...
    ... cut into one side of the box, and which take a plug with a polarising bump ... set the same distance apart as the recess. ... the recess, ensure that a plug can only be inserted into a socket, the right ... to be useable with existing connectors. ...
    (sci.electronics.repair)
  • Re: Identifying a Connector ...
    ... cut into one side of the box, and which take a plug with a polarising bump ... set the same distance apart as the recess. ... the recess, ensure that a plug can only be inserted into a socket, the right ... to be useable with existing connectors. ...
    (sci.electronics.repair)
  • Re: Remote Power Supply Connection
    ... connectors and some medical ... There are not many plug and socket designs which can withstand sideways ... I think octal plugs and octal valve sockets are fine. ...
    (rec.audio.tubes)
  • Re: Need connectors and Pin housings were to buy???
    ... until you have your final result - burnt connectors. ... The originals were IDT type connectors. ... is to replace them with discrete crimp contacts such as Molex Trifurcon ... 08-52-0113 type contacts and standard 0.156 plug housing. ...
    (rec.games.pinball)