Re: Drum sander experience/question. ... About 90% of the time they come out clean and I am nowhere as careful as you ... Almost no dust escapes from the machine and the inside ... >is between the drums and the third is after the second drum. ... With the second drum not being used a shorter drive belt was ... (rec.woodworking)
Re: Emerson vcr wont play, tape screeches ... make absolutely certain that the drum is clean. ... if the grooves on it ...clean the roiller guides which draw the tape round the drum again. ... (sci.electronics.repair)
Re: cleaning video drum ...Matter of fact, it records and plays just fine. ... But I want to clean the drum.... (sci.electronics.repair)
Re: Brother HL-2040 black spot ... The lack of printing of that area indicates the drum photosensitive area is either damaged or had something covering it, or had the area lose its photo conductive surface there. ... Over time, the area begins to pick up toner or not clean properly but if the are has become rough and is always picking up toner now, or is not getting wiped clean now, or some toner melted or stuck onto it, or it got contaminated with adhesive or grease and is now picking up toner, it may leave a black spot where it before left a white area. ... Be gentle because scratches will permanently damage the drum, and keep the drum out of direct light, only expose it to low room lighting for short periods of time. ... (comp.periphs.printers)
Re: How to remove contact cement? ...yellow/orange-ish.... you'll never totally get it all off the drum....John Hanks wrote: ... but I'm hoping I can clean up the ... (rec.music.makers.percussion)
