Re: Kenwood KT-747L Tuner
- From: Chuck <ch@xxxxxxxx>
- Date: Mon, 28 Apr 2008 11:49:27 -0500
On Sat, 26 Apr 2008 12:56:40 -0700 (PDT), Brasto
<bram.stolk@xxxxxxxxx> wrote:
This Tuner does not have any audio output. Probing its ckts with the
Oscilloscope showed that at two identical IC's marked 5223 5711 the
audio is present at one pin only. It looks like the system is in a
MUTE mode or the signal is not switched to the output-jacks. The front-
End and Tuning ckts are OK.
I cannot find any data on the IC's , schematic of the KT-747L would be
very helpfull.........
Is there anybody out here who has some knowledge on this receiver?
TY
Bram
The ics are probably M5223 op amps. Check the pinout of a NTE778A for
the operating parameters. I don't know if this is your problem but
Kenwoods of this era had a problem with electrolytic caps shorting out
in audio circuits. Chuck
.
- References:
- Kenwood KT-747L Tuner
- From: Brasto
- Kenwood KT-747L Tuner
- Prev by Date: Re: Intermittent fault in Eizo 19" T766 CRT
- Next by Date: Re: Pioneer sx-727 radio dead
- Previous by thread: Kenwood KT-747L Tuner
- Next by thread: make $97.36 PER HOUR guarenteed.... easiest cash you'll ever make!
- Index(es):
Relevant Pages
|
