Re: Broken Burleigh WA20-VIS (I know Sam has used these before)
- From: Sam Goldwasser <sam@xxxxxxxxxxxxxxxxxxx>
- Date: 22 May 2008 08:53:22 -0400
mkaram@xxxxxxxxx writes:
We just got this retired WA20 wavemeter donated to our lab from Los
Alamos.
I haven't cracked the case open yet but when I plug it in I hear a
revving noise which I'm guessing is a bad belt.
Considering the cost of these machines as well as their sensitivity I
was hoping to find somebody with a tech manual I can go over before I
start this project.
Open the bottom. Most likely, you'll find the belt stretched out and
sitting on the bottom cover. Replace it with anything that fits and
you'll be good to go. :) An elastic band will work well enough to test it.
EXFO, the company that acquired Burleigh doesn't have any
documentation on their site available. I'm going to phone them but I'm
guessing I'll come up empty handed... this has been discontinued for
too long I guess.
So... before I bite the bullet and open this up I wanted to gather as
much info as I could.... has anybody here ever repaired the belt in
these things? Any tips? Alternatively, does anybody have or have
access to a tech manual?
http://repairfaq.cis.upenn.edu/Misc/Lasers/burleigh/WA-10_20.pdf
It's a wonderful machine. I just wish it was about 1/10th the size! :)
--- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html
Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.
.
- Follow-Ups:
- Re: Broken Burleigh WA20-VIS (I know Sam has used these before)
- From: Matthew Karam
- Re: Broken Burleigh WA20-VIS (I know Sam has used these before)
- References:
- Prev by Date: Re: Nokia 6500 Classic stereo headphones adapter problem
- Next by Date: Re: CMOS DRAM chips and static
- Previous by thread: Broken Burleigh WA20-VIS (I know Sam has used these before)
- Next by thread: Re: Broken Burleigh WA20-VIS (I know Sam has used these before)
- Index(es):
Relevant Pages
|
