Re: Cat 5 Install Pricing
- From: "ABLE_1" <royboynospam@xxxxxxxxxxxxx>
- Date: Mon, 30 Jun 2008 22:16:20 -0400
Hello,
I just finished a job today with 10 drops in a much smaller space. 280 feet
of wire. Drop ceiling. Surface mount wiremold with boxes. 12 port patch
panel. Panduit jacks. Calculated 6 hours labor. Worked out to be $72/drop
in a T&M job.
If I used your $20/ft it would have been $5600.00 which would have been real
nice. Generally I have heard that per drop prices to be $125 to $150 per.
But have found that I am very happy with T&M and will make good money. It
depends on your overhead and skills.
If you are happy with your hourly rate and markup work it out that way.
Just do the math. If conduit is already installed as you say, it sounds
like you have a very sweet job.
Good luck.
Les
Hi everyone, I know this is a bit off topic, but I don't know a good group
to ask this in.
I've done PC repair work as a side business on the weekends for years now
and recently I have a customer that wants me to install a network in a
small dentist office. It is a new building and I will be installing 10
computers. There will be a computer at all 6 dental chairs one at the
x-ray machine and 3 in the receptionist area. The office is not large,
about 50 feet by 30 feet and the conduit and boxes are installed for the
cable. I just have to pull the conduit and tack it up above the dropped
ceiling and of course add connectors to the ends.
My question is how much should I charge for pulling and installing cat 5
cable in this situation. I have been given all sorts of suggestions from
$20/ft to $75 per cable drop. $20 per foot seems outrageous to me, but
that's why I'm asking.
TIA.
Mike
.
- Follow-Ups:
- Re: Cat 5 Install Pricing
- From: Michael Kennedy
- Re: Cat 5 Install Pricing
- Prev by Date: Re: Do power supplies in shut down come on briefly?
- Next by Date: Re: Cat 5 Install Pricing
- Previous by thread: Re: Cat 5 Install Pricing
- Next by thread: Re: Cat 5 Install Pricing
- Index(es):
Relevant Pages
|