Re: Digital television and the sun

On Sun, 20 Jul 2008 10:46:29 -0700, Dave Platt wrote:
I've also had problems with amps of this sort when there's a radio
transmitter nearby... the strong signal from a transmitter will
saturate the amplifer, causing interference and signal loss on all of
the channels going through the amp.

That's a VERY good point, and it brings up another question for Chuck B:
when the digital reception is messed up, does it *stay* messed up
continuously, or does it work OK for awhile and then go bad & then come
back again?

Most radio transmitters either operate continuously day and night, or
operate intermittently. (I talk for a few seconds, then let go of the
mike & let the other guy talk) If the interference is intermittent, maybe
it's coming from a transmitter at a business that only uses it during the
day? (construction firm, factory, etc.)

If there is an amplifier, it might be worthwhile taking it out of the
circuit for awhile. You might lose some channels altogether but if it
allows the stations that do come in to continue to come in during the day
then you have a pretty good lead.

.

Relevant Pages

  • Re: New digital TV - dont know whats wrong.
    ... locking onto the first transmitter that it finds rather than checking for ... was very odd because they all ignored lots of signals that were much better ... long time manually shuffling channels. ... are actually impossible to tune in a reasonable time and I have thrown the ...
    (uk.tech.digital-tv)
  • Re: Electric RC Planes - Newbie questions
    ... Should I go for the ones with more channels? ... brushless motors require a brushless ESC and a brushed motor requires a brushed ESC. ... Second, you need to get an ESC that can handle the current that the motor is going to want to draw -- you certainly don't want your performance limited by the ESC, or worse your ESC burnt up. ... A synthesized transmitter will let you choose what channel to fly on at the field. ...
    (rec.models.rc.air)
  • Re: Tuner not found
    ... it hence I went over to the Terratec. ... This may not be your problem but it's worth a thought Depending on your DVB-T transmitter ... It seems that in Vista that when you scan for channels it tries the center frequencies and the +/- ... 167KHz offsets, finds all of the channels, and then forgets about the offsets thus ...
    (microsoft.public.windows.mediacenter)
  • Re: Local Oscillator Convention for Single Conversion?
    ... HOWEVER if you do the sums, yoiu will at least find that the difference is 910kHz, and IIRC at least in Europe we use 20Khz channel spacing, so no other transmitter even on an image, will produce a signal that is closer than 10KHz to the wanted signal in the IF. ... That is within the bounds of what a decent IF can block pretty well.Also I think our channels do NOT extend to 910KHZ in total. ... So there are no signals on the images at all. ... whether all SC rx's use an LO offset that is above the carrier freq, ...
    (rec.models.rc.air)
  • Re: Digital television and the sun
    ... the strong signal from a transmitter will ... the channels going through the amp. ... But with digita signals and ...
    (sci.electronics.repair)